Your lights stop flickering. Your breakers stop tripping. Your home can actually handle the load you’re putting on it—EV charger, heat pumps, modern appliances, all of it.
You’re not wondering if the work was done to code. You’re not second-guessing whether your family is safe. The electrical panel that’s been humming along since 1987 finally gets the upgrade it needed a decade ago.
If you’ve been dealing with power issues in Jamestown—and plenty of homes here have, especially after storms knock out transformers or voltage drops dim half the house—you know how disruptive it gets. A residential electrical company that actually knows the local grid issues, understands what older homes need, and shows up with the right license and insurance makes that disruption end faster. You get your power back, your systems running properly, and the peace of mind that comes from knowing it won’t fail again next week.
We’ve been handling residential and commercial electrical work across Rhode Island for over 30 years. That’s more than 1,500 commercial projects and countless homes kept running through storms, upgrades, and emergencies.
We’re members of the Rhode Island Electrical Inspectors IAEI Roger Williams Chapter and fully compliant with NFPA’s Certification Code of Ethics. Our team is licensed, insured, and familiar with the specific challenges Jamestown properties face—aging infrastructure, storm vulnerability, and the electrical demands of modern living in older homes.
You’re not getting a fly-by-night crew learning on your dime. You’re getting electricians who’ve seen it all and know how to fix it right the first time.
First, we assess what’s going on. That means looking at your panel, testing your circuits, and figuring out whether you need a repair, an upgrade, or a complete replacement. No upselling—just honest evaluation based on what your system can and can’t handle.
Next, we walk you through what needs to happen. If your panel is maxed out and you’re adding an EV charger, we’ll explain why an upgrade isn’t optional—it’s code and it’s safety. If your wiring is outdated or your breakers are constantly tripping, we’ll show you what’s causing it and what it takes to fix it permanently.
Then we do the work. Licensed electricians, proper permits, full code compliance. We’re not cutting corners or leaving you with a mess. Everything gets tested, inspected, and verified before we consider the job done.
After that, your electrical system works the way it should. You flip a switch, the lights come on. You plug in your car, it charges. Your generator kicks on during the next outage. That’s the standard.
Ready to get started?
You get a licensed electrical contractor who shows up on time and finishes the job correctly. That includes electrical panel upgrades for homes that can’t handle modern electrical loads, generator installation and repair for backup power during outages, and emergency electrical services when something fails at the worst possible time.
We handle EV charger installations—and yes, that includes the load calculations and panel assessments most homes in Jamestown need before adding a 240-volt charging circuit. Rhode Island offers rebates through PowerUpRI for EV infrastructure, and we’ll make sure your installation qualifies and meets all requirements.
Jamestown has dealt with its share of power issues. Transformer failures, voltage drops, storm damage—it’s not rare here. We’ve worked with local homeowners through all of it, and we understand what the grid does to older homes when things go sideways. Our team knows how to troubleshoot these problems fast and get your power stable again.
Routine maintenance is part of what we offer too. Electrical systems don’t fix themselves, and catching small issues before they become expensive emergencies saves you money and stress. We’ll inspect, test, and maintain your system so it keeps running at peak performance.
Your panel needs an upgrade if your breakers trip frequently, you see flickering lights when appliances kick on, or you’re adding new electrical loads like an EV charger or heat pump. Most homes built before 2000 have 100-amp or 150-amp panels, and modern electrical demands often exceed that capacity.
If you’re planning to install an EV charger, your panel almost certainly needs evaluation. A Level 2 charger pulls significant power, and most older panels can’t support that load without upgrades. We’ll run a load calculation to determine whether your existing panel can handle it or if you need a service upgrade to 200 amps.
Another sign is physical damage—rust, scorch marks, or a warm panel box. Those indicate serious problems that need immediate attention. Electrical panels don’t last forever, and if yours is 25+ years old, it’s worth having a licensed electrician assess whether it’s still safe and functional.
Installing a whole-home generator starts with sizing the unit to match your home’s electrical load. That means calculating what you need to keep running during an outage—heating, cooling, refrigeration, lights, and any critical medical equipment. Undersizing a generator leaves you without power when you need it most.
Next comes placement and permitting. The generator needs proper clearance from your home, fuel source access (natural gas or propane), and a concrete pad for stability. We handle all permitting and ensure the installation meets local codes and manufacturer specs.
Then we install a transfer switch, which automatically disconnects your home from the grid and switches to generator power during an outage. This prevents backfeeding, which is dangerous and illegal. Once everything is wired and tested, your generator will kick on within seconds of losing utility power—and you won’t even notice the lights went out. Jamestown sees enough storm-related outages that a generator isn’t a luxury—it’s reliability.
You need a licensed electrician. EV charger installation involves 240-volt wiring, circuit breaker installation, and often electrical panel upgrades. It’s not a plug-and-play situation, and doing it wrong creates fire hazards, code violations, and potential insurance issues.
Most homes need a dedicated 40-amp or 50-amp circuit for a Level 2 charger, and that requires running new wiring from your panel to the charging location. If your panel is already near capacity, you’ll need a service upgrade before adding that load. A licensed electrician will run a load calculation to determine what your system can handle and what upgrades are necessary.
Rhode Island offers rebates through PowerUpRI for EV charger installations, but those rebates require professional installation and proof of compliance. DIY installations don’t qualify. Beyond the rebate, you want the work done right—your EV charger will pull serious power every night for years, and improper installation leads to overheating, tripped breakers, and worse.
Panel upgrades typically range from $2,000 to $4,000 depending on the scope of work, but every job is different. If you’re upgrading from 100 amps to 200 amps, that’s a straightforward service upgrade. If your home needs rewiring, new circuits, or utility coordination for a meter relocation, costs increase.
Older homes in Jamestown sometimes have additional complications—outdated wiring, insufficient grounding, or panels located in difficult-to-access areas. Those factors affect both labor and materials. We price each job individually because cookie-cutter estimates don’t account for what your specific home needs.
What matters more than the upfront cost is avoiding the expense of doing it twice. A cheap panel upgrade that doesn’t meet code or fails inspection ends up costing more in the long run. You’re paying for licensed work, proper permitting, and a system that actually supports your home’s electrical demands. That’s not where you want to cut corners.
If your power is cutting out while your neighbors stay lit, the problem is likely isolated to your home’s electrical system—not the utility grid. That points to issues with your main breaker, service entrance wiring, or connections at your meter or panel.
Start by checking your main breaker. If it’s tripped or loose, that’s your culprit. But if the breaker looks fine and your power is still unstable, you need a licensed electrician to diagnose it. Loose connections, corroded wiring, or a failing main breaker can all cause intermittent power loss, and they’re all safety hazards.
Jamestown has seen its share of grid issues—voltage drops, transformer failures, and storm damage—but when the problem is isolated to one home, it’s almost always internal. Don’t wait for it to resolve itself. Electrical issues don’t improve over time, they get worse. Get it checked before it turns into a complete failure or, worse, a fire hazard.
Yes. Electrical emergencies don’t wait for business hours, and neither do we. If you’ve lost power, smell burning, see sparks, or have any situation that poses immediate risk, we respond fast.
Emergency electrical services cover everything from storm damage and downed lines (on your property—utility lines are the power company’s responsibility) to failed panels, tripped mains that won’t reset, and any situation where your electrical system has become unsafe. We’ll assess the problem, make it safe, and get your power restored as quickly as possible.
Jamestown’s location makes it vulnerable to weather-related electrical issues. High winds, heavy storms, and coastal conditions all contribute to power problems. Having a local electrical contractor who knows the area and responds quickly makes a real difference when you’re sitting in the dark or dealing with a dangerous electrical fault.
Local Resources
Useful Links
