You flip a switch and the lights come on. Your breaker handles the load when you run the AC and charge your car at the same time. Your panel doesn’t hum, spark, or trip every time someone plugs something in.
That’s what code-compliant electrical work gets you. Not just a system that works today, but one that keeps working without the constant worry that something’s about to fail or catch fire.
When your electrical system is installed right the first time by a licensed electrical company in Rehoboth, MA, you’re not calling someone back in six months because the job wasn’t done properly. You’re not dealing with failed inspections or having to pay twice to fix what should’ve been handled correctly from the start. You get a system that supports how you actually live—whether that’s running a business, powering a modern home, or preparing for backup power when storms knock out the grid.
We’re a local electrical contractor in Rehoboth, MA, fully licensed and insured to handle residential and commercial electrical work. We’re not a call center dispatching whoever’s available. You’re working with a Master Electrician who knows Massachusetts electrical code and how it applies to the homes and businesses in this area.
Rehoboth properties—especially older ones—weren’t built for the electrical demands you’re putting on them now. Most homes here have under 200-amp service, and that doesn’t cut it when you’re adding EV chargers, heat pumps, or central air. We’ve been upgrading panels, installing generators, and fixing electrical issues in this town long enough to know what works and what doesn’t.
You need someone who can pull permits, pass inspections, and do the work without cutting corners. That’s what we do.
You call or reach out with the issue—flickering lights, a breaker that keeps tripping, or you need a panel upgrade to support new equipment. We schedule a time that works for you, and we show up when we say we will.
We assess what’s going on. If it’s a repair, we explain what’s wrong and what it’ll take to fix it. If it’s an upgrade or installation, we walk you through what the job involves, what permits are required, and what the timeline looks like. No guessing, no vague estimates.
Once you’re clear on the scope and cost, we do the work. That means pulling the right permits, doing the installation to code, and making sure everything passes inspection. If it’s a panel upgrade, we coordinate with the utility company. If it’s a generator install, we handle the transfer switch and make sure it’s wired correctly.
When the job’s done, your system works the way it should. You’re not wondering if it’s safe or if it’ll hold up. It’s installed right, it’s inspected, and it’s ready to handle whatever you’re running.
Ready to get started?
When you hire a licensed electrical company in Rehoboth, MA, you’re getting work that meets current National Electrical Code standards and Massachusetts state requirements. That matters because code violations don’t just fail inspections—they create safety hazards and insurance problems.
Rehoboth homes built before 2000 often need panel upgrades to handle modern electrical loads. If you’re installing an EV charger, adding a heat pump, or putting in a backup generator, your existing 100-amp or 150-amp panel probably won’t support it. We upgrade panels to 200-amp service, install the proper circuits, and make sure your system can handle what you’re asking it to do.
For commercial properties, we handle everything from lighting upgrades to three-phase power installations. You need your electrical system to support your operation without downtime, and that means getting the work done right the first time.
We also install and maintain backup generators—critical in Rehoboth where storms regularly knock out power. A properly installed generator with a transfer switch means your home or business stays powered when the grid goes down. We size the system correctly, install it to code, and make sure it actually works when you need it.
If your breaker trips frequently, your lights flicker when you run major appliances, or you’re adding new electrical loads like an EV charger or central air, your panel probably can’t handle the demand. Most older homes in Rehoboth have 100-amp or 150-amp panels, and that’s not enough for modern electrical needs.
Another sign is the age of your panel. If it’s over 25-30 years old, it’s likely outdated and may not meet current safety standards. Panels with Federal Pacific or Zinsco branding are known fire hazards and should be replaced immediately.
When you’re planning to install solar panels, a heat pump, or any major electrical equipment, the utility company or your installer will often require a panel upgrade before they’ll connect the new system. It’s not optional—it’s about making sure your electrical service can safely support the load you’re putting on it.
Panel upgrade costs in Rehoboth typically range from $2,000 to $4,500, depending on the scope of work. A straightforward swap from a 100-amp to a 200-amp panel is on the lower end. If we need to upgrade the service entrance, run new wiring, or coordinate a meter relocation with the utility company, costs go up.
Permit fees in Massachusetts add to the total, and any work requiring utility coordination—like upgrading the service drop or moving the meter—adds time and cost. If your panel is in a difficult location or your home needs additional circuits run as part of the upgrade, that also affects pricing.
The real cost isn’t the upfront number—it’s what happens if you don’t upgrade. An overloaded panel is a fire risk, and it’ll prevent you from installing equipment your home needs. Spending money on a proper upgrade now means you’re not dealing with electrical failures, failed inspections, or safety hazards later.
Yes. Any electrical work beyond basic repairs—like replacing a light fixture or outlet—requires a permit in Massachusetts. Panel upgrades, new circuits, generator installations, and any work involving your main electrical service all need permits and inspections.
Permits aren’t just red tape. They ensure the work is done to code and inspected by someone who knows what to look for. If you sell your home and unpermitted electrical work is discovered, it can kill the sale or force you to pay for costly corrections.
We pull permits as part of the job. We handle the paperwork, schedule the inspections, and make sure everything passes. You don’t have to deal with the town or worry about whether the work is legal. It’s done right, it’s documented, and it won’t come back to bite you.
A typical whole-home generator installation in Rehoboth, MA takes one to three days, depending on the size of the system and site conditions. That includes setting the generator pad, running the gas or propane line, installing the transfer switch, and wiring everything to your electrical panel.
If you need a new gas line run or if your electrical panel requires an upgrade to support the generator, that adds time. We also need to coordinate inspections with the town and, in some cases, the utility company. Permit approval can take a week or two, so the total timeline from start to finish is usually two to four weeks.
Once it’s installed, your generator needs to be tested and programmed. We run it through a full cycle to make sure it kicks on when power drops and switches back when the grid comes back online. You’re not guessing whether it works—you know it does because we’ve tested it.
A breaker that trips repeatedly is telling you something’s wrong. It could be an overloaded circuit, a short somewhere in the wiring, or a failing breaker. Don’t just keep resetting it—that’s not fixing the problem, and it could be dangerous.
Start by unplugging everything on that circuit and resetting the breaker. If it holds, plug devices back in one at a time to see what’s causing the trip. If the breaker trips immediately with nothing plugged in, you’ve got a wiring issue or a bad breaker.
If you’re running high-draw appliances—like a space heater, window AC unit, or power tools—on the same circuit as other devices, you’re probably overloading it. Older homes in Rehoboth weren’t wired for the number of electronics and appliances we use now. The fix might be adding a dedicated circuit or upgrading your panel to support the load. Either way, we can diagnose it and tell you what needs to happen.
It depends on your panel’s capacity and how much load you’re already running. Most Level 2 EV chargers pull 40 to 50 amps, and they need a dedicated circuit. If your panel is already near capacity or you’re running a 100-amp service, you probably don’t have room for it.
We assess your current electrical load, check your panel’s available capacity, and determine whether you can add the charger or if you need a panel upgrade first. In many cases, homes in Rehoboth, MA need to upgrade to 200-amp service to safely support an EV charger along with everything else running in the house.
Installing a charger without enough capacity doesn’t just trip breakers—it creates a fire hazard. The right approach is to size your electrical service properly, install a dedicated circuit for the charger, and make sure everything is permitted and inspected. That way, you’re charging your car safely without overloading your system.
Local Resources
Useful Links
