You flip a switch and expect the lights to come on. You plug in your phone and expect it to charge. When your electrical system works the way it’s supposed to, you don’t think about it.
But when outlets stop working, breakers keep tripping, or you’re wondering if that old wiring is safe—that’s when you need someone who knows what they’re doing. Not someone who’ll patch it together or tell you everything’s fine when it’s not.
A properly functioning electrical system means your family stays safe, your appliances run efficiently, and you’re not dealing with power issues every other week. It means passing inspections, keeping your insurance valid, and not worrying every time there’s a storm. That’s what matters—and that’s what you should expect from any residential electrician in Rehoboth, MA.
We’ve been handling electrical work across Rhode Island and Massachusetts for more than three decades. We’re licensed, insured, and we’ve completed over 1,500 commercial projects—but we also work on plenty of homes in Rehoboth.
Rehoboth has a lot of older homes. Many were built when knob and tube wiring was standard, and those systems weren’t designed for the way you use electricity today. We understand what these homes need, and we know how to bring them up to code without unnecessary upselling.
We’re members of the Rhode Island Electrical Inspectors IAEI Roger Williams Chapter and follow the NFPA’s Certification Code of Ethics. We’ll provide certificates of insurance when you need them. You’re hiring a local electrical repair company that shows up, does the work right, and doesn’t leave you guessing.
First, we’ll talk through what’s going on. Whether it’s a panel that needs upgrading, outlets that aren’t working, or you’re planning a renovation that requires new wiring—we’ll ask the right questions to understand the scope.
Then we’ll schedule a time that works for you. When we arrive, we assess the situation in person. We’ll explain what needs to happen, why it needs to happen, and what it’s going to cost. No surprises, no upselling services you don’t need.
Once you’re good to move forward, we do the work. That might mean replacing old wiring, installing a new panel, adding circuits for a home addition, or setting up a generator. We pull the necessary permits, we follow Massachusetts electrical code, and we make sure everything passes inspection. When we’re done, your electrical system works the way it should—and you’ll know exactly what was done and why.
Ready to get started?
We handle the full range of residential and commercial electrician work in Rehoboth, MA. That includes electrical panel upgrades—especially important if you’re still running a 60 or 100-amp panel that can’t keep up with modern demand.
We do knob and tube wiring replacement, which matters here because many Rehoboth homes still have it. That old wiring isn’t just outdated—it’s a safety risk, it voids most homeowner’s insurance policies, and it disqualifies you from Mass Save energy efficiency programs. Replacing it brings your home up to the 2020 National Electrical Code and removes a major liability.
Generator installation is another big one. New England storms knock out power regularly, and if you’ve sat through a multi-day outage in winter, you know why a backup generator matters. We size it correctly, install it to code, and make sure it’s ready when you need it.
We also handle electrical repair—outlets that don’t work, flickering lights, tripped breakers—and new installations for renovations, additions, or upgraded systems. If it involves electrical wiring services in Rehoboth, MA, we’ve done it before.
If your breakers trip frequently, your lights dim when you run appliances, or you’re still using a fuse box, your panel probably needs an upgrade. Most older homes in Rehoboth were built with 60 or 100-amp panels, and that’s not enough for today’s electrical load.
Modern homes typically need at least 200 amps to safely run HVAC systems, kitchen appliances, electronics, and everything else you plug in daily. If you’re adding central air, a home office, or any major appliance, your current panel might not handle it.
Another sign: if you’re planning a renovation or addition, the building inspector will likely require a panel upgrade to meet current code. It’s not optional—it’s about safety and capacity. We’ll assess your current system, explain what you actually need, and give you a clear cost before any work starts.
It’s not automatically dangerous if it’s in perfect condition and not overloaded—but that’s rarely the case. Knob and tube wiring was installed in homes until around 1950, and it lacks a ground wire, which is essential for modern safety standards.
The bigger issue is insulation. When insulation surrounds knob and tube wiring, it can overheat and create a fire hazard. That’s why most insurance companies won’t cover homes with active knob and tube, or they’ll charge significantly higher premiums.
Massachusetts electrical code doesn’t allow it in new construction or major renovations. If you’re selling your home, you’ll have to disclose it, and many buyers will either walk away or demand it be replaced before closing. Replacing it isn’t cheap, but it’s necessary—and it removes a serious liability from your property.
It depends on what you want to run during an outage. A smaller generator (around 7-10 kW) can handle essentials like your refrigerator, a few lights, and your heating system. A mid-size unit (12-20 kW) adds things like your well pump, more outlets, and maybe a window AC unit.
If you want whole-house coverage—running everything like normal—you’re looking at 22 kW or higher. We don’t just guess at this. We calculate your actual load based on your panel size, the appliances you want to power, and how your home is set up.
Generator installation in Rehoboth, MA also means pulling permits and following local codes. We handle that. We also make sure it’s positioned correctly, connected safely to your electrical system through a transfer switch, and tested before we leave. You’ll know exactly what it powers and how to use it when the lights go out.
For standard service calls—troubleshooting an outlet, replacing a switch, fixing a tripped breaker—you’re typically looking at $140 to $475 depending on the complexity and time involved. Emergency calls after hours or on weekends cost more, sometimes up to $300 just for the service call plus a higher hourly rate.
Bigger jobs vary. Panel upgrades usually run several thousand dollars depending on the amperage and whether we need to upgrade your service line. Knob and tube replacement depends on how much wiring needs to go and how accessible it is. Generator installations range widely based on size and installation complexity.
We’ll give you a clear estimate before starting any work. No hidden fees, no surprise charges. If something changes during the job, we’ll tell you before we proceed. You’ll know what you’re paying and why.
In Massachusetts, any significant electrical work legally requires a licensed electrician. That includes anything beyond replacing a light fixture or outlet cover. Panel work, new circuits, rewiring, generator hookups—all of that must be done by someone with at least a Journeyman Electrician license (Class B) or a Master Electrician license (Class A).
Licensing isn’t just paperwork. Journeyman electricians complete 8,000 hours of hands-on experience and 600 hours of classroom instruction. Master electricians go even further. That training matters when you’re dealing with 240-volt systems and making sure your home doesn’t burn down.
Unlicensed work also creates problems with permits and inspections. If you ever sell your home, unpermitted electrical work will show up during the inspection, and you’ll have to pay to fix it properly. Hiring a certified electrician in Rehoboth, MA costs more upfront, but it’s done right, it’s insured, and it’s legal.
We can identify where your electrical system is wasting energy and recommend upgrades that actually make a difference. That might mean installing a more efficient panel, upgrading to LED-compatible fixtures, or making sure your circuits aren’t overloaded and causing inefficiencies.
If you have knob and tube wiring, replacing it opens the door to Mass Save programs, which offer rebates and incentives for insulation and energy efficiency upgrades. Right now, active knob and tube wiring disqualifies you from those programs entirely.
Massachusetts has some of the highest electricity rates in the country—over 31 cents per kilowatt-hour. Small inefficiencies add up fast. We’re not going to sell you things you don’t need, but if there are clear opportunities to reduce waste and lower your bill, we’ll point them out. The average single-person household in Rehoboth pays around $1,723 a year for electricity. Even a 10-15% reduction makes a noticeable difference.
Local Resources
Useful Links
