You flip a switch and the lights come on. Every time. Your outlets work without that buzzing sound that’s been keeping you up at night. Your breaker box isn’t hot to the touch anymore.
That’s what happens when a certified electrician in Coventry, RI actually fixes the problem instead of slapping a band-aid on it. You’re not wondering if your house is safe. You’re not calling someone else in six months because the same issue came back.
Your electrical system works the way it’s supposed to. You’ve got enough power for everything you’re running. And if a storm knocks out the grid, your generator kicks on without you lifting a finger.
We’ve been handling electrical work in Coventry, RI for over 30 years. That means we’ve worked on the farmhouses off Route 117, the split-levels near Tiogue Lake, and the older homes around Washington that still have knob and tube wiring hiding in the walls.
We know what Rhode Island weather does to your power. We know what your electrical panel needs to handle when you’re running heat pumps in January. And we know how to bring a 1970s electrical system up to code without tearing apart your whole house.
Licensed, insured, and part of the Rhode Island Electrical Inspectors IAEI Roger Williams Chapter. We’re not the cheapest option in town, and that’s intentional. You’re paying for work that passes inspection the first time and doesn’t need a callback.
You call or message us with what’s going on. We ask a few questions to understand whether it’s an emergency or something we can schedule. If your panel’s smoking or you’ve got exposed wires, we’re moving fast. If you’re planning a kitchen remodel and need new circuits, we’ll set up a time that works.
We show up when we say we will. Our electrician walks through what’s happening, explains what needs to happen, and gives you a straight answer on cost before any work starts. No surprises, no upselling you on stuff you don’t need.
Then we do the work. We pull permits if the job requires it. We make sure everything’s up to code. And when we’re done, your electrical system does exactly what you need it to do. You get documentation of what was done, and if you ever have questions down the road, you’ve got our number.
Ready to get started?
Electrical panel upgrades for homes that are tripping breakers because your 100-amp service can’t handle modern loads. Generator installation so you’re not in the dark when the next storm rolls through—and in Coventry, RI, that’s not a matter of if, but when. Knob and tube wiring replacement for older homes where outdated wiring is a fire hazard waiting to happen.
Electrical wiring services for additions, renovations, or new construction. Outlet and switch repair when things stop working or start sparking. Lighting installation, both inside and out. Troubleshooting for issues you can’t pin down on your own.
We handle residential and commercial work. Over 1,500 commercial projects throughout Rhode Island, so whether you’re a homeowner or running a business in Coventry, RI, we’ve seen your situation before. We also do routine maintenance to catch problems before they become emergencies, because most electrical failures give you warning signs if you know what to look for.
Your breakers trip regularly, especially when you’re running multiple appliances. That’s the most obvious sign. Your panel might also feel warm to the touch, you might smell burning plastic near it, or you might notice lights dimming when the AC kicks on.
Most homes in Coventry, RI were built in the 1970s, and a lot of them are still running the original 100-amp or 150-amp panels. That was fine when you had a TV, a fridge, and a few lamps. It’s not fine when you’re charging an electric car, running a heat pump, working from home with multiple computers, and doing laundry at the same time.
If your home is over 40 years old and you’ve never upgraded the panel, it’s worth having someone take a look. A licensed electrician in Coventry, RI can assess your current load, figure out what you actually need, and tell you whether an upgrade makes sense or if something else is going on.
For a standby generator that powers your whole house, you’re typically looking at $8,000 to $15,000 installed. That includes the generator itself, the transfer switch, permits, electrical hookup, and gas line connection if you’re running it on natural gas or propane.
Portable generators are cheaper upfront—$500 to $2,000—but you’re manually setting them up every time the power goes out, they only run essential circuits, and you’re storing gas. Standby generators kick on automatically within seconds of losing power, and they run as long as needed without you doing anything.
The price depends on the size of your home, how much of it you want powered during an outage, and what your current electrical setup looks like. If your panel’s outdated or you don’t have a gas line, that adds to the cost. But given how often Rhode Island loses power during storms, most people who install a generator wish they’d done it sooner.
It’s both old and dangerous, but not for the reason most people think. Knob and tube wiring itself isn’t inherently unsafe if it’s in perfect condition and not overloaded. The problem is it’s never in perfect condition anymore, and it was never designed for the electrical load you’re putting on it now.
The insulation deteriorates over time. The wiring wasn’t grounded, which means no protection if something goes wrong. And most importantly, it was installed when homes used a fraction of the power they use today. Running modern appliances, electronics, and HVAC systems on knob and tube wiring is asking for a fire.
Insurance companies in Rhode Island know this. Many won’t insure a home with knob and tube wiring, and the ones that will charge you more for it. If you’re buying or selling a home in Coventry, RI and the inspector finds knob and tube wiring, it’s going to come up. Replacing it isn’t cheap, but it’s a lot cheaper than dealing with an electrical fire or losing your insurance coverage.
If you’ve got sparking outlets, a burning smell from your panel, or exposed wires, that’s an emergency and we treat it like one. We’ll get someone to you as fast as possible, usually within a few hours depending on where we are and what time you call.
For true emergencies—anything that’s an immediate fire or shock hazard—shut off power at the main breaker if you can do it safely, and call us right away. Don’t wait until morning. Don’t try to fix it yourself. Electrical emergencies get worse, not better.
If it’s urgent but not life-threatening—like you lost power to half your house or your generator won’t start during an outage—we’ll prioritize you over scheduled work and get there the same day or next morning. We’ve been doing this in Coventry, RI long enough to know that when someone calls with a real problem, they need help now, not next week.
Rhode Island law requires a licensed electrician for most electrical work, and there’s a reason for that. Electrical work isn’t like fixing a leaky faucet. If it’s done wrong, your house burns down or someone gets electrocuted.
A licensed electrician in Coventry, RI has gone through 8,000 hours of supervised training, passed state exams, and carries insurance. If something goes wrong, you’re covered. If a handyman does your electrical work and something happens, your homeowner’s insurance can deny your claim because the work wasn’t done by a licensed professional.
Beyond the legal and safety issues, licensed electricians pull permits and make sure the work passes inspection. That matters when you sell your home. Unpermitted electrical work shows up in inspections, and buyers will either walk away or demand you fix it before closing. Doing it right the first time with a certified electrician costs less than doing it twice.
First, check your breaker panel. If a breaker tripped, it’ll be in the middle position or flipped to “off.” Flip it all the way off, then back on. If it trips again immediately, you’ve got a short circuit or an overloaded circuit, and you need an electrician to figure out what’s going on.
If the breaker didn’t trip and the outlets still aren’t working, you might have a GFCI outlet that tripped. These are the outlets with the little reset buttons, usually in bathrooms, kitchens, and garages. One GFCI can control multiple outlets, so if your bedroom outlet stops working, check the GFCI in your bathroom. Press the reset button and see if that fixes it.
If neither of those solves it, something else is wrong—a loose connection, a failed outlet, or a bigger wiring issue. That’s when you call a local electrician in Coventry, RI to troubleshoot it. Electrical problems don’t fix themselves, and they usually get worse the longer you wait.
Local Resources
Useful Links
