Residential Standby Generator Sales Rhode Island

Your Home Stays On. No Matter What.

When the next nor’easter knocks out power in Johnston or Cranston, a standby generator means you never notice. We sell, size, install, and service residential standby generators across Providence County — backed by 30 years of Rhode Island experience and factory-trained Generac expertise.

Serving All Of Rhode Island, & Parts of Massachusetts: Seekonk Swansea Rehoboth

We Now Offer Financing!

Please click the link to inquire or apply for financing through Synchrony bank

30 Years in Rhode Island

We've been installing generators in Providence County homes since before most competitors entered the market. Local experience matters here.

Authorized Certified Generac Dealer

Your warranty stays intact when an authorized dealer installs your system. We're factory-trained on Generac equipment — not learning on your home.

Master Electricians, Inspector Certified

Every installation is performed by fully licensed Master Electricians who are also Electrical Inspector Certified — the highest credential combination in Rhode Island.

We Pull Every Permit

Rhode Island requires electrical permits for standby generator installations. We handle all of it — permits, coordination, inspections — so you don't have to.

Home Backup Generator Sales Providence County

The Right Generator, Sized for Your Home

A residential standby generator connects permanently to your home’s electrical system and runs on natural gas or propane. When the power goes out, it detects the outage and starts supplying electricity to your home within seconds — automatically, without you doing anything. No extension cords. No trips outside in the rain. No fuel cans. Most Providence County homes we work with need somewhere between 14kW and 24kW depending on what they want to power. We size every system based on your actual electrical load, not a rough guess, so you get what you need without paying for more than that. We carry Generac’s full residential lineup, including the Guardian Series, and can discuss options from other leading brands depending on your home’s requirements. Whatever you’re looking for in a whole-home generator, we’ll help you find the right fit.

Why Buy a Whole-Home Generator RI

What Changes the Day After Installation

You stop reacting to storms and start ignoring them — because your home handles it before you even realize the grid went down.
Residential Standby Generator Sales Ri | Lightning Electric FAQs

Common Questions About Our Service

For most single-family homes in Providence County, the right range is somewhere between 14kW and 24kW. The actual number depends on what you want to power — whether that’s just the essentials like your heat, sump pump, and refrigerator, or your entire home including central air and larger appliances. Larger homes or properties with higher electrical demands may need up to 30kW. We don’t size by guesswork. During your estimate, we calculate your actual electrical load and recommend a generator that fits your home specifically — not the biggest unit we carry.
A portable generator has to be set up manually, placed outside to avoid carbon monoxide risk, and refueled with gasoline — usually in the middle of the storm you’re trying to survive. It also can’t power your whole home. A standby generator is permanently installed outside your home, connected to your natural gas or propane supply, and wired directly into your electrical system through an automatic transfer switch. When the power goes out, it detects the outage and starts within seconds — without you touching anything. It runs until utility power is restored, then shuts itself off automatically. The difference in convenience is significant, especially during a multi-day outage in Providence County.
Yes. Rhode Island requires electrical permits for standby generator installations, and the work must be performed by a licensed electrician. In Providence County, that means coordinating with the local building and inspections department, and the installation needs to pass an electrical inspection before the system is considered complete. We handle all of that. We pull the permits, schedule the inspections, and make sure everything is done by the book. You don’t have to navigate any of the paperwork or make calls to the permit office — that’s part of what we do on every job.
Yes, and it’s something we do regularly across Providence County. Older homes — particularly the pre-1950s housing stock common in neighborhoods like Federal Hill, Pawtucket, Woonsocket, and Central Falls — sometimes have electrical panels or wiring that need to be evaluated or upgraded before a generator can be safely connected. That’s not a dealbreaker; it’s just part of the process for older homes. We specialize in Rhode Island’s historic housing stock, including knob-and-tube wiring replacement and panel upgrades, so we know what to look for before installation begins. If another contractor told you your house was too complicated, we’d encourage you to get a second opinion from us.
Every standby generator we install includes an automatic transfer switch, which is wired between your home’s electrical panel and the generator. The transfer switch monitors your utility power continuously. The moment it detects that utility power has been lost, it signals the generator to start. The generator begins supplying electricity to your home within seconds. When utility power is restored, the transfer switch detects that too, switches your home back to grid power, and signals the generator to shut down. You don’t have to do anything. The system also runs a brief self-test weekly to confirm it’s ready to go when you need it.
Yes. We offer financing through Synchrony Bank, which allows you to spread the cost of your generator purchase and installation over time rather than paying everything upfront. A standby generator is a meaningful investment, and financing makes it more accessible for homeowners who want the protection now without a large lump-sum payment. If you’re interested in financing options, just mention it when you reach out for your estimate and we’ll walk you through what’s available. There’s no obligation to apply, and getting a free estimate doesn’t commit you to anything.
1

Free On-Site Estimate

We visit your home, assess your electrical panel, and calculate your actual load to recommend the right generator size — no guesswork, no pressure.

2

Permits, Pad, and Installation

We pull the required permits, prepare the concrete pad, connect the fuel line, and install the automatic transfer switch — handled entirely by our licensed team.

3

Commission, Inspect, and Hand Off

We run the system through a full test, coordinate the required inspection, set up Mobile Link remote monitoring, and walk you through everything before we leave.