Your insurance company stops threatening to drop you. That’s usually the first thing homeowners notice after a knob and tube upgrade in Tiverton, RI.
The second thing? You can actually use your appliances without worrying whether you’re overloading a circuit that was installed when refrigerators didn’t exist. Modern electrical demand requires modern wiring, and knob and tube systems weren’t built for what you’re plugging in today.
You’ll also sleep better knowing the fire risk is gone. Deteriorating insulation, improper modifications over the decades, and contact with modern materials all turn old wiring into a legitimate hazard. Once we replace outdated wiring in your house with a grounded, code-compliant system, that risk disappears.
And if you’re planning to sell? Buyers won’t walk away during inspection. Appraisers won’t flag your electrical system as a deal-breaker. Your home value stays intact, which matters in a market where Tiverton’s median home price sits around $430,000.
We’ve spent three decades working on homes across Rhode Island, and we’ve seen every version of knob and tube wiring you can imagine. Some of it’s been modified six different ways. Some of it’s original and untouched since the 1920s. All of it needs to come out.
We’re Master Electricians, IAEI certified, and fully licensed and insured. We’ve completed over 1,500 commercial projects, but residential work—especially old home electrical wiring replacement in Tiverton, RI—is where we spend most of our time. Nearly 18% of Tiverton’s housing stock was built before 1939, so we’re not surprised when we open a wall and find cloth-wrapped wire stapled to porcelain knobs.
You’re not getting a crew that’s going to guess their way through your electrical system. You’re getting electricians who know how these old homes were built, what’s behind the plaster, and how to replace the wiring without destroying your walls in the process.
We start with an inspection. We need to see what’s actually in your walls, how the system was modified over the years, and where the knob and tube wiring runs. That tells us how much work we’re dealing with and what the removal will involve.
Once we map everything out, we plan the new system. That means figuring out where circuits need to go, how to route new wiring with minimal disruption, and how to bring everything up to current Rhode Island electrical code. You’ll get grounded outlets, proper circuit protection, and enough capacity to handle what you’re actually using.
Then we do the work. We pull out the old wiring, install the new system, and make sure everything is tested and inspected. Yes, there’s some wall access involved—we’re not magicians—but we do everything we can to limit the damage and keep the mess contained.
After the final inspection passes, you’re done. Your electrical system is safe, your insurance company is satisfied, and you don’t have to think about what’s happening inside your walls anymore.
Ready to get started?
You’re getting full knob and tube wiring removal in Tiverton, RI—not a partial fix or a “we’ll just cover the visible stuff” job. We remove the old wiring, install a new grounded system, add a modern breaker panel if needed, and make sure every circuit meets code.
That includes running new wire through your walls, installing grounded outlets, adding GFCI protection where required, and upgrading your service panel to handle modern electrical loads. If your home is still running on 60 amps, we’ll bring it up to at least 100 or 200 amps depending on your needs.
Tiverton has a lot of historic homes—beautiful properties with character and craftsmanship you don’t see anymore. We respect that. Our goal isn’t to gut your house. It’s to replace the wiring safely, efficiently, and with as little disruption as possible. We’ve done this enough times to know how to work in old homes without tearing them apart.
You’ll also get documentation for your insurance company and any future buyers. That matters when you’re trying to prove your electrical system is no longer a liability.
Yes, and many already have. Insurance companies see knob and tube wiring as a significant fire risk, and they’re not interested in covering homes with outdated electrical systems. Some insurers will refuse to write a new policy if they find it during underwriting. Others will cancel your existing policy once they discover it.
Even if your insurer doesn’t drop you outright, you’ll likely pay higher premiums or face restricted coverage. That’s not a scare tactic—it’s standard practice across the industry. The older the wiring, the bigger the liability, and insurance companies price risk accordingly.
The only real solution is to replace knob and tube wiring in Tiverton, RI with a modern, grounded system. Once that’s done and documented, your insurance situation goes back to normal. You’ll get standard rates, full coverage, and no more letters threatening cancellation.
It depends on how much wiring you have, how accessible it is, and whether you need a full panel upgrade. A small home with limited knob and tube might cost less than a large historic property where the wiring runs through every wall and ceiling.
We price every job individually because no two homes are the same. Some houses have knob and tube in just one section. Others have it throughout the entire structure. The scope of work changes dramatically depending on what we find during the inspection.
What we can tell you is that the cost of removing old wiring is almost always less than the cost of dealing with an electrical fire, losing your insurance, or watching a buyer walk away because of a failed home inspection. This isn’t an expense—it’s an investment in safety, insurability, and property value. We’ll give you a clear estimate after we assess your home, and we’ll explain exactly what you’re paying for.
Most homes take anywhere from a few days to a couple of weeks, depending on size and complexity. A small bungalow with straightforward access might be done in three to five days. A larger home with multiple floors, finished ceilings, and limited access points will take longer.
We’re not going to rush the job just to get it done faster. Electrical work needs to be done right, and that means taking the time to route wiring properly, make solid connections, and ensure everything passes inspection. Cutting corners doesn’t save you time—it creates problems you’ll have to fix later.
You’ll still be able to live in your home during the work. We’ll coordinate with you to minimize disruption, and we’ll make sure you have power where you need it. Once we’re finished, the system gets inspected, and you’re good to go. The timeline might feel long when you’re in the middle of it, but it’s a one-time fix that solves the problem permanently.
Technically, yes—until it stops working, causes a fire, or gets flagged by an inspector or insurance company. Just because it’s still functioning doesn’t mean it’s safe. Knob and tube wiring wasn’t designed for modern electrical loads, and the insulation deteriorates over time.
The bigger issue is that most knob and tube systems have been modified incorrectly over the years. Someone added an outlet here, spliced in a new circuit there, and now you’ve got a mix of old and new wiring that’s not up to code. That’s when things get dangerous.
If you’re planning to sell, you’ll have to deal with it eventually. Buyers will either demand a price reduction or walk away entirely. If you’re refinancing, lenders might require an electrical upgrade before approving the loan. And if your insurance company finds out, you’re back to square one with coverage issues. Old home electrical wiring replacement in Tiverton, RI isn’t optional if you want to avoid those problems—it’s just a matter of when you do it.
We’ll need access to the wiring, but we’re not going to demolish your house to get it. We use existing access points wherever possible—attics, basements, closets, and areas where we can fish wire without major demolition. When we do need to open walls or ceilings, we keep it to a minimum and make the openings as small as possible.
Old homes in Tiverton, RI often have plaster walls, which are more delicate than modern drywall. We know that, and we work carefully to avoid unnecessary damage. You’ll likely need a plasterer or drywall contractor to patch things up after we’re done, but the openings won’t be massive.
The goal is to replace the wiring with the least amount of disruption. We’ve done this hundreds of times, and we’ve gotten good at finding the most efficient routes through a home. You won’t end up with gaping holes in every room—just the access points we need to do the job right and bring your electrical system up to code.
Yes, and we handle that for you. Any electrical work that involves replacing wiring and upgrading your system requires a permit and a final inspection. That’s not red tape—it’s how you prove the work was done correctly and meets Rhode Island electrical code.
The permit process ensures that everything is documented, inspected, and approved by a licensed electrical inspector. That documentation is what you’ll give to your insurance company, future buyers, or anyone else who needs proof that your home no longer has knob and tube wiring.
We pull the permits, schedule the inspections, and make sure everything passes. You don’t have to deal with the town or chase down paperwork. Once the inspector signs off, you’ll have official confirmation that your electrical system upgrade is complete and code-compliant. That’s the piece of paper that makes all the difference when you’re dealing with insurance companies or selling your home.
Local Resources
Useful Links
Other Services we provide in Tiverton
