Your insurance company stops threatening to drop your policy. You can finally add insulation to your attic without creating a fire hazard. Your outlets work the way they should, and you’re not wondering if that flickering light is about to start a fire.
Most homes in Glocester were built before 1980, and plenty still have the original knob and tube wiring installed decades ago. That cloth-wrapped wiring wasn’t designed for the electrical load your family uses today. It has no grounding, the insulation deteriorates over time, and it becomes a serious fire risk when buried under modern insulation.
After knob and tube wiring removal in Glocester, RI, you get a fully grounded electrical system that meets current code. You can plug in your appliances without worry. You can move forward with that kitchen remodel or bathroom addition. And if you’re planning to sell, you won’t lose buyers over outdated wiring that scares off lenders and inspectors.
This isn’t about upgrading for the sake of it. It’s about making your home safe and functional for how you actually live.
We’ve been serving Rhode Island homeowners with licensed, certified electrical work. We’re Master Electricians who understand the unique challenges of older homes in Glocester, from Cape-style houses in Chepachet to 1950s ranches on rural lots.
We know what it’s like to deal with well pumps, septic systems, and power outages that take longer to fix out here. Your electrical system needs to be reliable, and it needs to be done right the first time.
We’re members of the Rhode Island Electrical Inspectors IAEI Roger Williams Chapter and follow NFPA Code of Ethics standards. Every job is fully insured, and we provide certificates of insurance on request. You’re not getting a crew that cuts corners or disappears halfway through the job.
We start with a full assessment of your existing electrical system. That means checking your panel, mapping out where the old wiring runs, and identifying what needs to be replaced. You’ll get a clear explanation of what we found and what the job involves before any work begins.
Once we start, we run new wiring through your walls, attic, and basement to replace the old knob and tube. We install a modern electrical panel if yours is outdated, add proper grounding throughout the house, and make sure every circuit meets current code. We do our best to minimize wall and ceiling damage, and we coordinate with you if any drywall work is needed.
Most knob and tube wiring removal projects in Glocester, RI take one to three weeks depending on the size of your home and how much wiring needs replacing. We keep the work area clean, we show up when we say we will, and we walk you through what we did once the job is complete. You’ll have documentation for your insurance company and any future buyers.
Ready to get started?
You get a complete electrical system upgrade designed for how your family lives today. That includes removing all knob and tube wiring, installing new grounded wiring throughout your home, upgrading your electrical panel to handle modern loads, and bringing everything up to current Rhode Island electrical code.
In Glocester, many homes sit on larger lots with private wells and septic systems. Your electrical system needs to support those systems reliably, especially during the winter when power outages are more common. We make sure your panel has the capacity for backup power options if that’s something you’re considering down the road.
We also address any safety issues we find along the way, like overloaded circuits, outdated outlets, or improper wiring that’s been patched over the years. You’ll get a system that’s safe, grounded, and ready for whatever you plug into it. And because we’re local, we understand what insurance companies in Rhode Island are looking for when they review your electrical work.
Most insurance companies in Rhode Island either refuse to cover homes with knob and tube wiring or charge significantly higher premiums. Some will drop your existing policy once they find out the wiring hasn’t been replaced. They see it as a fire risk, and they’re not wrong.
If you’re trying to buy a home in Glocester with knob and tube wiring, your lender may require you to replace it before closing. If you already own the home, your insurance company may give you a deadline to upgrade or they’ll cancel your coverage.
The good news is that once you complete knob and tube wiring removal in Glocester, RI, you can provide documentation to your insurance company showing the work was done by a licensed electrician. That usually restores your coverage and can even lower your premiums.
The cost depends on the size of your home, how much wiring needs replacing, and whether your electrical panel also needs an upgrade. Most full-home knob and tube wiring removal projects range from $8,000 to $25,000 in the Glocester area.
Smaller homes or partial replacements cost less. Larger homes with more complex layouts, multiple stories, or difficult attic and basement access cost more. If your home still has a 60-amp panel, you’ll also need to upgrade to at least 100 or 200 amps to meet code and handle modern electrical demands.
We provide upfront, project-based pricing after we assess your home. You’ll know what the job costs before we start, and there won’t be surprise charges halfway through. The investment pays off in safety, insurance coverage, and resale value.
Technically, knob and tube wiring that’s in good condition and hasn’t been altered isn’t illegal. But “still working” doesn’t mean it’s safe for how you’re using electricity today. The wiring wasn’t designed for the load modern families put on it, and it has no grounding to protect you or your devices.
The bigger issue is that most knob and tube wiring in Glocester homes is 70 to 100 years old. The cloth insulation breaks down over time, especially in attics where it’s exposed to heat and moisture. Once that insulation deteriorates, you have exposed wires that can arc and start fires.
You also can’t safely add insulation around knob and tube wiring, which means your home is harder to heat in the winter and costs more to run. And again, insurance companies won’t cover it. Leaving it in place might seem cheaper in the short term, but it’s a risk that’s not worth taking.
Most projects take one to three weeks depending on the size of your home and the scope of work. A smaller ranch with straightforward access might take a week. A larger two-story colonial with a finished basement and limited attic access might take closer to three weeks.
We work efficiently, but we don’t rush. Electrical work has to be done right, and that means taking the time to run new wiring properly, install everything to code, and test the system before we finish. We’ll give you a realistic timeline after we assess your home.
You’ll still have power during most of the work. We coordinate shutoffs with you so you’re not left without electricity for long stretches, and we clean up at the end of each day. The goal is to get the job done with as little disruption as possible.
In most cases, yes, we’ll need to open some walls and ceilings to access the old wiring and run new cables. How much depends on your home’s layout and where the wiring runs. We do our best to minimize damage and choose access points that are easier to repair.
Attics and basements give us the most access without tearing into finished spaces, so if your home has open attic space or an unfinished basement, that helps. For finished areas, we may need to cut small access holes in walls or ceilings, but we’re strategic about placement.
We don’t do the drywall repair ourselves, but we can coordinate with you or refer you to someone who does if you need it. The important thing is that the electrical work is done safely and correctly. A little patching and painting is a small trade-off for a system that’s actually safe.
Any major renovation in Glocester will require you to address the knob and tube wiring in the areas you’re working on, and often throughout the entire home. Building inspectors won’t sign off on new work if the old wiring doesn’t meet code, and contractors won’t want to work around it.
If you’re planning a kitchen remodel, bathroom addition, or finishing a basement, the electrical system upgrade needs to happen first. That’s actually a good thing because it means you’re not pouring money into cosmetic updates while ignoring a serious safety issue underneath.
We can work with your contractor to coordinate the electrical system upgrade for old homes in Glocester with your renovation timeline. That way, everything gets done in the right order, and you’re not paying twice to open up the same walls.
Local Resources
Useful Links
